EN - GBP 
Austria - EUR
Belgium - EUR
Bulgaria - EUR
Cyprus - EUR
Czech Republic - EUR
Estonia - EUR
Greece - EUR
Hungary - EUR
UK - GBP
Ireland - EUR
Latvia - EUR
Lithuania - EUR
Luxembourg - EUR
Malta - EUR
Netherlands - EUR
Norway - NOK
Portugal - EUR
Romania - EUR
Slovakia - EUR
Slovenia - EUR
Switzerland - EURReplace the battery on Husqvarna Automower 435X AWD and 535 AWD.
Here is our step by step guide on how to remove and replace the battery on the Husqvarna Automower 435X AWD and 535 AWD.
How often should the battery be changed?
Typically, an original battery will last anywhere from four to six seasons, depending on how many hours the robotic mower has been working.
You will notice that the battery starts to lose power when the robot cuts for very short periods and charges frequently
At the bottom of the page you will find the spare parts needed to carry out a battery replacement.
 Step 1: Turn your Automower over. Unscrew the six marked screws to remove the battery cover. |  Step 2: Remove the battery cover and unscrew the two marked screws to remove the battery holder. |
 Step 3: Disconnect the two battery connectors and remove the old battery. | Step 4: Insert the new battery and plug in the connectors. Then screw the battery holder back on. |
| Step 5: Replace the battery cover and tighten the six marked screws. |
No programming is required after installing a new battery. Just use your lawnmower as usual.
We used the following spare parts
Replace the battery on Husqvarna Automower 435X AWD and 535 AWD.
Here is our step by step guide on how to remove and replace the battery on the Husqvarna Automower 435X AWD and 535 AWD.
How often should the battery be changed?
Typically, an original battery will last anywhere from four to six seasons, depending on how many hours the robotic mower has been working.
You will notice that the battery starts to lose power when the robot cuts for very short periods and charges frequently
At the bottom of the page you will find the spare parts needed to carry out a battery replacement.
| Step 1: Turn your Automower over. Unscrew the six marked screws to remove the battery cover. |
| Step 2: Remove the battery cover and unscrew the two marked screws to remove the battery holder. |
Step 3: Disconnect the two battery connectors and remove the old battery. |
| Step 4: Insert the new battery and plug in the connectors. Then screw the battery holder back on. |
| Step 5: Replace the battery cover and tighten the six marked screws. |
No programming is required after installing a new battery. Just use your lawnmower as usual.
Help center is a digital DIY manual for Husqvarna Automower robotic lawnmower. We teach you how to change batteries, circuitboards and other spare parts on your Husqvarna Automower.